DECORATIVE PRODUCTS
CEM-SPRAY
(Spray texture systems)
Description:
CEM-SPRAY Spray Texture is a ready-mix powder compound used in the application of interior surfaces. It can be applied to ceilings, walls, wooden furniture, etc. by a hopper gun or spray plastering machine. A wide range of texture patterns can be created using a roller, brush, spray plastering machine or a hopper spray gun.
Areas of Application:
- Concrete Substrates.
- Masonry surfaces.
- Plastered walls.
- Dry wall.
- Cement Boards.
- Interior Surfaces.
Features & Benefits:
- Easy Mixing.
- Spreads easily.
- Non aggregated texture.
- Excellent adhesion over a wide variety of porous surfaces, concrete, and all types of masonry surfaces.
- Developed for different texture patterns.
- Prevents common undesired effects like craters, lumps, pin holes, etc.
Precautions & Limitations:
- For laying tiles on floor, the Surface should be sufficiently hard & in good condition.
- It is recommended for interior application only.
- Always add powder to water & never add water to powder.
- Do not add excess water than recommended.
- For spraying on walls and ceiling, the surface should be sufficiently hard & in good condition.
- It is not considered as a finished surface.
- A sealer coat is required after texturing to avoid differences in sheen on the wall and ceiling surfaces.